Tinted windows are beneficial as they give the car a stylish appeal, increase privacy and also block UV rays that can harm you. But the problem is that these windows need special attention to keep their tint in good condition and working order.
In this blog post, we will share some tips on how to wash tinted car windows properly. To ensure your tinted windows are in the best shape possible, follow these tips and learn how we can assist you with our services.
Why Tinted Windows Need Special Care
Tinted windows are made from a thin layer of film applied to the glass panes. This delicate film can be damaged by chemicals and rough surfaces, leading to scratches, bubbling, or peeling. Thus, it is important to know the special care that must be taken to ensure that tinted windows are well-maintained for them to be effective.
Step-by-Step Guide to Washing Tinted Car Windows
1. Gather the Right Supplies
- Microfiber Cloths: These are soft and non-abrasive and are suitable for cleaning tinted car windows.
- Mild Cleaning Solution: For the tinted windows, use water and a few drops of dish soap or a commercial cleaning agent.
- Spray Bottle: To spread the cleaning solution, use a spray bottle, sponge, or clean cloth.
2. Initial Dusting
- First, begin cleaning the windows with a dry microfiber cloth to dust off the surfaces. This can assist in clearing off dirt and other debris that may be loosely stuck on the tint without causing any scratches on the tint.
3. Apply the Cleaning Solution
- To achieve this, pour your mild cleaning solution into a spray bottle. Do not clean the windows with ammonia-based products, as they may harm the tinting.
- To use the solution, it is recommended to spray it on the window lightly. This will also include not wetting the window too much; just enough to make it wet is enough.
4. Wipe Down the Windows
- With a clean and dry microfiber cloth, start the cleaning process by stroking the window straight up and down. Do not rub in a circular motion, as this can leave smears on the surface.
- Don’t rub the surface to avoid smudges or finger marks; press gently to wipe them off.
5. Dry the Windows
- Then, it is advisable to use another clean and dry microfiber cloth to wipe the window to ensure that no wetness is left. This reduces the chances of water spots and streaks on the floor.
- Before proceeding with the tint installation, ensure that all surfaces are dry to prevent damage.
6. Final Inspection
- Rub the windows in various ways and make sure that there are no smears on the window glasses.
- If there are still some spots or streaks, then you should clean the surface one more time.
Common Mistakes to Avoid
i. Using Abrasive Materials
Never use paper towels, sponges, or any rough cloth to wipe the tint, as this can cause scratching.
ii. Applying Too Much Pressure
This is because when there is too much pressure applied to the film, it might get damaged.
iii. Using Harsh Chemicals
Avoid using strong cleaning agents, especially those containing ammonia, to prevent damage to the tint.
Maintaining Tinted Windows Over Time
Regular cleaning is essential, but it’s also important to follow these additional tips to maintain your tinted windows: Regular cleaning is essential, but it’s also important to follow these additional tips to maintain your tinted windows:
i. Avoid Rolling Down Windows
It is recommended that you should not roll down the windows for at least a week after tinting to give the film some time to bond with the window.
ii. Park in Shade
To minimize the effects of sunlight on the tint, it is advisable to park the car under the shade instead of leaving it in the open, where it will be exposed to direct sunlight.
iii. Use Sunshades
It is advisable to use sunshades to protect the interior of your car and the tint from the heat, particularly if you are driving in hot weather.
Why Choose Sun and Safety Film for Your Tinted Windows
Here at Sun and Safety Film, we fully appreciate the effort that goes into the preservation of your car and, therefore, the need to provide only the best services when it comes to the tinting of your car windows. Our professional services include:
i. Expert Installation
Our technicians, with years of experience, will ensure that your windows are properly tinted and fitted.
ii. High-Quality Films
We use only durable, high-quality fabrics and provide maximum protection from the sun’s UV rays.
iii. Comprehensive Maintenance
We can offer window cleaning and regular maintenance services to ensure that your windows remain spotless.
Keep Your Tinted Windows Crystal Clear with Expert and Professional Care
It is important to note that maintaining tinted car windows is a simple process. Proper techniques and tools are important to keep them looking good for the next several years. For all your installation needs or professional maintenance of the product, contact Sun and Safety Film. Kindly contact us today to get more information on the services we offer and how we can help maintain the value of your car.
Interested in enhancing your car by getting the best-tinted windows?
Don’t hesitate to contact Sun and Safety Film for your consultation today. Find out how we can improve and protect the look of your car.
Please visit our website for more information, or you can contact us at +971528625959 to book an appointment. Here at Sun and Safety Film, we know that your car is important to you, and that is why we are here for the best.
